Aeromotive-13140-Aluminum-A1000-Gen-II-EFI-Fuel-Pressure-Regulator-01-dcf

Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator

Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator
Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator
Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator
Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator
Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator

Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator
Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator. High Performance, adjustable EFI regulator designed for medium to high horsepower applications. This regulators features Aeromotive’s high-flow design, superb pressure control and legendary durability. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Engineered for A1000 class and smaller pumps. Gas, ethanol, methanol and diesel compatible. 40-75 PSI adjustable base pressure range. 1:1 vacuum/boost reference capability. 1/8? NPT dedicated gauge port. (2) ORB-08 inlet/outlet ports. (1) ORB-06 return port. Regulator Pressure (psi): 40-75. Boost/Vacuum Reference Port: Yes. Boost/Vacuum Rise Ratio: 1:1. Regulator Inlet Size: -10 AN. Inlet Attachment: Female straight cut O-ring. Regulator Outlet Size: -10 AN. Outlet Attachment: Female straight cut O-ring. Return Fitting Size: -6 AN. Return Attachment: Female straight cut O-ring. Regulator Finish: Black anodized. Mounting Bracket Included: No.
Aeromotive 13140 Aluminum A1000 Gen-II EFI Fuel Pressure Regulator
Dhd-700-97327685-Updated-Duramax-Cp3-Regulator-Jumper-Harness-2001-2010-Lb7-Lly-01-yz

Dhd 700-97327685 Updated Duramax Cp3 Regulator Jumper Harness 2001-2010 Lb7 Lly

Dhd 700-97327685 Updated Duramax Cp3 Regulator Jumper Harness 2001-2010 Lb7 Lly
Dhd 700-97327685 Updated Duramax Cp3 Regulator Jumper Harness 2001-2010 Lb7 Lly
Dhd 700-97327685 Updated Duramax Cp3 Regulator Jumper Harness 2001-2010 Lb7 Lly
Dhd 700-97327685 Updated Duramax Cp3 Regulator Jumper Harness 2001-2010 Lb7 Lly

Dhd 700-97327685 Updated Duramax Cp3 Regulator Jumper Harness 2001-2010 Lb7 Lly
This harness connects to the fuel pressure regulator on the CP3 and the engine harness. These harnesses are subject to extreme heat and are often targets for rodents. DHD always recommends replacing this complete harness section rather then doing wire repairs. High resistance repairs could lead to idle fluctuations and erratic engine rpm. DHD’s updated regulator jumper is designed to replace your flimsy OE jumper. Our jumper features a full split loom sleeve, larger gauge primary wiring and foil shielding to prevent interference. Best of all, this is a seamless harness leaving no room for connector failure or corrosion. Direct Plug and Play Replacement. Foil Shielding to Prevent Interference. Expanded Model Coverage Over OE.
Dhd 700-97327685 Updated Duramax Cp3 Regulator Jumper Harness 2001-2010 Lb7 Lly
Go-Fast-Bits-FX-S-Adjustable-rising-rate-fuel-pressure-regulator-gauge-GFB-8050-01-rqw

Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050

Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050
Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050
Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050
Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050
Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050
Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050

Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050
Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050. 1 x Go Fast Bits. Fuel pressure regulator and gauge – High Pressure (EFI). (Quote when making any enquiries). It is IMPORTANT that you check the FIT and SPEC Tabs, please do NOT just rely on the item tittle. Bypass or deadhead style. Compatable with all fuels including E85 and other Ethanol blends, double layer/double reinforced diaphragms with a burst strength exceeding 1000psi. Teflon co-polymer seat with stainless valve to retain fuel pressure longer after shut down and dual 1/8 NPT gauge port. Mutliple feed ports, single return port and dual gauge ports (all 1/8 NPT). This part is not considered a DIY fitment or it has universal applications. You will require some basic mechanical skill and experience to allow installation. You may also need additional items, specialised tools or to make some modifications. Mounting bracket, 1/8 NPT blanking plugs, 4mm barb for vac reference. Outlet or return port. 1/16 NPT female (4mm barb adaptor included). Inlet fitting (if supplied). Outlet fitting (if supplied). Vac fitting (if supplied). We send all parcels with Auspost eParcel. All parcels are tracked. Ou will need to. Do not checkout to pay for this item (yet). Most stock is on the shelf and can be collected same day but please allow 2-4 hours for your order to be processed and picked. Yes we combine post, typically.
Go Fast Bits FX-S Adjustable rising rate fuel pressure regulator+ gauge GFB 8050
SUZUKI-SV-650-1000-2005-2012-FUEL-Pump-Pressure-Regulator-strainer-15100-16G00-01-ww

SUZUKI SV 650 1000 2005-2012 FUEL Pump Pressure Regulator strainer 15100-16G00

SUZUKI SV 650 1000 2005-2012 FUEL Pump Pressure Regulator strainer 15100-16G00
SUZUKI SV 650 1000 2005-2012 FUEL Pump Pressure Regulator strainer 15100-16G00

SUZUKI SV 650 1000 2005-2012 FUEL Pump Pressure Regulator strainer 15100-16G00
YOU WILL RECEIVE THE ENTIRE SET YOU SEE IN THE PICTURE. WHITE HOUSING WITH BUILT-IN INTERNAL FILTER. FUEL PUMP + FILTER. FUEL PRESSURE REGULATOR 3,5 BAR. THE STANDARD IS 3.0 BAR – BUT WE PROPOSE A STRONGER REGULATOR OF 3.5 BAR. FOR MINIMAL IMPROVEMENT OF YOUR MOTORCYCLE’S PERFORMANCE. IT’S AN EASY AND SAFE WAY TO INCREASE ENGINE POWER AND IMPROVE PERFORMANCE. When replacing the fuel pump, it is recommended to replace the fuel pressure regulator – together with the plastic housing with a high pressure filter built inside. WELL cooperate with other original parts.
SUZUKI SV 650 1000 2005-2012 FUEL Pump Pressure Regulator strainer 15100-16G00
MALPASSI-FILTER-KING-67mm-Fuel-Pressure-Regulator-injection-carburetor-return-01-es

MALPASSI FILTER KING 67mm Fuel Pressure Regulator injection carburetor return

MALPASSI FILTER KING 67mm Fuel Pressure Regulator injection carburetor return
MALPASSI FILTER KING 67mm Fuel Pressure Regulator injection carburetor return
MALPASSI FILTER KING 67mm Fuel Pressure Regulator injection carburetor return
MALPASSI FILTER KING 67mm Fuel Pressure Regulator injection carburetor return

MALPASSI FILTER KING 67mm Fuel Pressure Regulator injection carburetor return
We are offering for sale. Fuel pressure regulator with fuel filter in alloy bowl and return line for Weber/Dellorto/Solex carburetors and Facet pumps Genuine item made in ITALY. This is a bypass/converter fuel pressure regulator for. You can fit any kind of pump, both low pressure and high pressure for injection (in this case our regulator is used to convert fuel system from injected to carburetted). Under any load (from idle to fuel throttle) and driving (fast acceleration/deceleration, fast turns) conditions, you always will have stable pressure and high flow to carb/s. Our regulator is manufactured in special alloy casting, each piece is assembled by hand and tested to assure max precision in working. For use on naturally aspirated engine application. Compatible with alcoholed fuel (E85). 1 x INLET connector, 8 mm tail. Connector, 8 mm tail. With paper filter element. Pressure setting range from 0.05 to about 0.4 bar. Supplied with bracket and bolts for easy fitting. WHAT YOU SEE IS WHAT YOU GET. Not sure about item or need more parts, but can’t find it? Make sure you send us this information. 60 days for return. All parcels are insured. Pay within 7 days. Fuel pressure regulator with fuel filter in alloy bowl and return line for Weber/Dellorto/Solex carburetors and Facet pumps Genuine item made in ITALY This is a bypass/converter fuel pressure regulator for aspirated carburetted engines. For use on naturally aspirated engine application Compatible with alcoholed fuel (E85) Composite special diaphragm 1 x INLET connector, 8 mm tail 1 x OUTLET connector, 8 mm tail 1 x RETURN connector, 8 mm tail With paper filter element Alloy bowl Pressure setting range from 0. 05 to about 0. 4 bar Supplied with bracket and bolts for easy fitting.
MALPASSI FILTER KING 67mm Fuel Pressure Regulator injection carburetor return
Turbosmart-Black-FPR8-Fuel-Pressure-Regulator-Kit-with-AN8-Fittings-01-vnm

Turbosmart Black FPR8 Fuel Pressure Regulator Kit with AN8 Fittings

Turbosmart Black FPR8 Fuel Pressure Regulator Kit with AN8 Fittings

Turbosmart Black FPR8 Fuel Pressure Regulator Kit with AN8 Fittings
Turbosmart FPR8 Fuel Pressure Regulator Kit (Black) with AN8 Fittings. Fuel Pressure Regulator FPR8 Black. 3 x 8AN Inlet Ports. 1 x 1/8 NPT Gauge Port. Supports up to 2000HP of Flow. 1 x EFI Solutions 150 Psi Gauge. 3 x EFI Solutions AN8 ORB to AN8 Fittings. 1 x EFI Solutions AN8 ORB Plug. Your preferred method can be selected at checkout. Once your order leaves our warehouse unfortunately we have no control over unexpected delays with Australia Post or Courier services. We do not allow 3rd party pickups I. Can you declare international orders as gifts or at a low value? No, we will not provide false information on a government document for you. Can we request our order to be left if no one is home? You will need to take your Photo ID into the post office or depot along with the calling card (if one was left) to collect. We do this to protect our customers orders. What happens if my item arrives damaged? PRODUCTS SENT FOR CREDIT MUST BE IN RE-SELLABLE CONDITION (NO MARKS, DENTS, SCRATCHES AND IN ORIGINAL PACKAGING) We recommend sending the item via Australia Post with tracking. (unless the incorrect part was supplied by EFI Solutions).
Turbosmart Black FPR8 Fuel Pressure Regulator Kit with AN8 Fittings